IMPORTANT NOTES
!
competent person.
!
A basic knowledge and training in the installation of Fire Detection systems is assumed.
!
The Fire Detection system should be designed by a suitably qualified person with reference to the
Local Regulations and Guidance from the fire Officer where applicable.
!
All wiring should be carried out with no power present in any part of the fire detection system.
NOTE:
This unit should not be used to program the JUNO NET panel as it does not provide total
control over certain programming functions, namely all the functions that involve selecting loops in
the range 2-96 as no switches for loop change are provided.
This document provides detailed information on how to install and operate the JUNIOR MINI-REP when used
in conjuction with any of GFE’s Analogue Addressable Fire Detection panels using GFE’s RS-422/485 data loop
interface (J-NET-INT-RS485-NEW).
Detailed information on how to install these units in a network using either Fiber Optics or TCP/IP interfaces is
available in the appropriate interface installation manual and in the panel’s installation manual.
This unit is compatible with all models of the following panels:
JUNIOR V2, JUNIOR V3, JUNIOR V4, JUNO NET and JUNO NET EN54
Please note that for JUNIOR V2 and JUNO NET (Classic) panels, certain functions associated with key-switch
presses on the panel’s front display are different than those represented on the JUNIOR MINI-REP. If the JUNIOR
MINI-REP is going to be networked with either of these panel models, a modified overlay can optionally be
provided in these occasions. Please contact GFE for details.
Optionally the JUNIOR MINI-REP can be provided with a key-switch in order to gain access to Aceess Level 2
(Authorised User). Please contact GFE for details.
This equipment must only be installed and maintained by a suitably qualified and technically
Manufacturers of Fire Detection Equipment
INSTALLATION MANUAL 1.0 - 12/2015
JUNIOR MINI-REP
