background image

TIME  : 

  controls  the  delay  time.  The  value  can  either  be  in  milliseconds  or  in  bar 

divisions  if  the  «Sync»  switch  (metronome  icon)  is  active.  In  sync  mode,  if  the  tempo 
goes  below  40  BPM,  the  value  displayed  may  be  inaccurate  as  values  exceeding  the 
maximum delay size will be divided by 2. Range : 5Ms to 1000Ms in free mode, or 1 to 
128 bar divisions in sync mode 

FEEDBACK  :

  Range  :  0%  to  100%  -  Controls  the  amount  of  the  feedback  signal 

(processed  by  the  other  effects).  Use  this  parameter  with  caution  as  high  values 
combined with high values of the modulation section 

amount

 parameter can lead to very 

loud sounds. If this happens, you can reset the delay lines and the feedback parameters 
by pressing the «PANIC» button. 

SEPARATION  :

  controls  how  late  the  right  channel  delay  will  be  compared  to  the  left 

channel delay. If set to 0%, both channels will be delayed by the same amount. If set to 
100% the delay time of the right channel will be twice the delay time of the left channel. 
This also impacts the stutter effect loop sizes. Range : 0% to 100% 

PING->OUT :

 if enabled, the output of the first delay line (pre-feedback) goes 

to  the  effect  mix,  otherwise  it  is  muted.  If  this  parameter  is  not  activated,  the 
modulation amount parameter must be higher than 0 to hear the delay.

STUTTER:

This effect is the first in the feedback signal chain. It loops short slices of the incoming 
audio which can then be played back at a different speeds and backwards.

SIZE :

 controls the loop length. This value is proportional to the delay time (so it can be 

different on each stereo channel depending on the separation amount in the delay)

SPEED :

 controls the speed at which the looped audio is played back. A value of 100% 

means normal speed, 200% means twice faster, 50% means twice lower and a value of 
0% stops the playback. Range : 0% to 400% 

MIX  :

  crossfades  between  the  normal  feedback  signal  and  the  output  of  the  stutter 

effect. Range : 0% to 100%

 

REV :

 when switched on, the looped signal will be played backwards

GLITCHMACHINES

  ®                                                                                                             VERSION 1.3

Содержание HYSTERESIS









Отзывы: