RATE :
the rate of the delay time modulation. Lower values will result in chorus type
effects while higher values will result in noisy ring-modulation/FM type sounds. This
parameter depends on the menu located at its right. When set to «Default» mode, the
rate will be the one set by the knob, but it can also be divided by 10 or multiplied by 10.
Range : 0Hz to 600Hz (base range, can be multiplied or divided by 10)
DEPTH :
controls the overall output of the modulation effect as well as the amount of
signal that will be fed back to this effect. Use this parameter with caution as high values
combined with high values of the delay section feedback can lead to very loud sounds.
If this happens, you can reset the delay lines and the feedback parameters by pressing
the «PANIC» button in the output section.
Range : 0% to 100%
MODULATION RATE:
The modulation rate can be multiplied or divided by 10 via the
drop down menu
OUTPUT:
D/W :
a standard dry/wet mix knob allowing you to blend the amount of the effect with
fully counter clockwise being zero effect, and fully clockwise being 100% effect.
LEVEL :
adjust the amplitude of the processed output signal in decibels (-70 to +6 dB).
PANIC BUTTON :
Resets the delay lines and feedback parameters
You can press the panic button in case of unwanted signal spikes
GLITCHMACHINES
® VERSION 1.3
Содержание HYSTERESIS
Страница 1: ...HY S T E R E S I S U S E RGU I D E ...
