GLITCHMACHINES HYSTERESIS, Руководство пользователя

Страница: 6 / 8

FILTER:
The lowpass filter is applied to the output of the stutter effect.
FLOOR : controls the minimum cutoff frequency in case the filter is modulated,
otherwise it sets the cutoff frequency. Range : 20Hz to 6kHz
MOD : controls the amount of LFO modulation applied to the cutoff frequency.
Range : 0% to 100 %
RATE : controls the rate of the LFO modulating the cutoff. Range : 0Hz to 20Hz
RESONANCE : the filter resonance at the cutoff frequency
MOD FX:
This effect is applied to the output of the filter but happens on the opposite audio
channel. It’s then routed back to the feedback input of the first delay on the original
channel.
GLITCHMACHINES
® VERSION 1.3