Glentek SMB9675-1A-1-7700, Руководство по установке и эксплуатации

Страница: 23 / 33

www.glentek.com Appendix C
MANUAL# 9675-1035-000-A 23
Appendix C - Application Software
C-1 MotionMaestro©
MotionMaestro© is Glentek's Windows based application software that you will need to setup and
tune the spindle drive. MotionMaestro© has many features that allow users to easily configure and
tune the entire Glentek digital product line. However, for the Fadal VMC replacement spindle drive
most of the setup has been done at the factory. The installer only needs go through a quick tuning
procedure to get the spindle drive up and running. But first, MotionMaestro needs to be installed.
C-2 Installing MotionMaestro©
C-2.1 Requirements
MotionMaestro© requires either Windows 95, Windows NT 4.0, Windows 98 SE, Windows 2000,
Windows ME, Windows XP, Windows 7, or the Windows 8 operating system. A computer with a serial
port or a USB port is also required. It is suggested that you have a minimum of 3 megabytes of
application program disk space available prior to installation.
C-2.2 MotionMaestro© v1.37
Only MotionMaestro© v1.37 or later will work with Glentek Inc. spindle drives, earlier versions are not
compatible.
C-2.3 Installation
The MotionMaestro© install disk is set up to utilize Install Shield to simplify installation.There are only
a few setup options offered. In general you can press NEXT or YES until installation is complete.
When installation is complete, you will find a MotionMaestro© icon in the Windows Start\Programs
menu. The MotionMaestro© installation program is named Setup.exe. It is found in the
MotionMaestro© \disk1 directory of the distribution CD, included with the spindle drive. The
installation will also create a Glentek folder in the Program Files folder.
A MotionMaestro© 1.37 folder is created when 1.37 installed. You can have multiple versions
of MotionMaestro© installed, if you wish, and they will be placed into their own directories. When
MotionMaestro© is directed to establish communications with the spindle drive, the spindle drive is
queried for a model ID and Firmware version. MotionMaestro© will configure itself and select the
appropriate configuration files based on the spindle drive
’s returned values.