Glentek SMB9675-1A-1-7700, Руководство по установке и эксплуатации

Страница: 16 / 33

Appendix A www.glentek.com
16 MANUAL # 9675-1035-000-A
A-4 Encoder Output Connector
Table A-4.1 Encoder Output Designations: Labeled as P5 on spindle drive.
Pin # I/O Name Function
1 Power GND Encoder Power Return
2 Output AOut + Encoder Channel A +
3 Output AOut - Encoder Channel A -
4 Output BOut + Encoder Channel B +
5 Output BOut - Encoder Channel B -
Table A-4.2 Encoder Output Connector
Connector Type/Description 5-Pin Terminal Block
Terminal Block,5 Position,
22-12 AWG
Phoenix Contact 1934890
A-5 Host (Serial Communication) Connector
Table A-5.1 Host (Serial Communication) Designations: Labeled as P6 on
spindle drive.
Pin # I/O Name Function
1 Reserved Reserved Reserved
2 Reserved Reserved Reserved
3 Reserved Reserved Reserved
4 Input/output COMMON Logic Ground
5 Output RS-232 TX RS-232 Transmit
6 Input RS-232 RX RS-232 Receive
7 Reserved Reserved Reserved
8 Reserved Reserved Reserved
Table A - 5.2. Host (Serial Communication) Connector
Connector Type/Description 8-Pin Male Mating Connector
Standard Commercial, RJ-45 Commercial, RJ45
A-6 Power and Signal Wiring
A-6.1 Recommend 3-phase input, 3-phase output, and chassis GND power wiring, 8 AWG
(8.36 mm
2
) or larger, 105°C rated PVC or better.
A-6.2 Recommend BUS+, BUS Return, and brake power wiring, 10 AWG (5.26 mm
2
) or larger,
105°C rated PVC or better.
A-6.3 Recommend all signal wiring, 22 AWG (0.326 mm
2
) or larger, 105°C rated PVC or better.