Glentek SMB9675-1A-1-7700, Руководство по установке и эксплуатации

Страница: 15 / 33

www.glentek.com Appendix A
MANUAL# 9675-1035-000-A 15
Table A-2.3 Spindle Control Designations: Labeled as P2 on spindle drive
Pin # I/O Name Function
1 Input FW /REV COM
Spindle Common (for Forward
& Reverse)
2 Input REVERSE Spindle Reverse
3 Input
F RW R
Spindle Forward
4 Input
F T/SPEED COM
CMD Common
(for Fault & Speed)
5
Input/
Output
F T
Emergency Stop/Spindle Fault
6 Output SPEED CMD Spindle Speed Command
Table A-2.4 Wye/Delta Config Designations: Labeled as P4 on spindle drive
Pin # I/O Name Function
1 Input
WYE /
E T
Wye or Delta modes
2 N/C Reserved Reserved
3 Input
HIGH /
W GAIN
High Gain or Low Gain modes
4 Input Common
Common for Wye/Delta and
High Gain/Low Gain modes
5 N/C Reserved Reserved
6 N/C Reserved Reserved
Table A-2.5 Spindle Control and Wye/Delta Config Connectors
Connector
Type/Description
6-Pin Male Mating
Connector Housing
Female Crimp Terminal
Receptacle, 6 Position,
22-18 AWG
Molex 03-09-1064 Molex 02-09-1119
A-3 Encoder Input Connector
Table A-3.1 Encoder Input Designations: Labeled as P3 on spindle drive.
Pin # I/O Name Function
1 Input Shield Cable Shield
2 Power +5V E5VDC out, 150mA max
3 Power GND Encoder Power Return
4 Input B - Encoder Channel B -
5 Input B + Encoder Channel B +
6 Input Z + Encoder Index + (Channel Z +)
7 Input A - Encoder Channel A -
8 Input A + Encoder Channel A +
9 Input Z - Encoder Index - (Channel Z -)
Table A-3.2 Encoder Input Connector
Connector
Type/Description
9-Pin Male Mating
Connector Housing
Female Crimp Terminal
Receptacle, 9 Position, 22-18 AWG Molex 03-06-1092 Molex 02-06-1103