Page
45
of
52
4. Firmware update preperation
To prepare the GS-MPI005HD MKII for a firmware update;
1. Make sure the device is connected with USB
2. Press and hold down the CONTROL Shaft Encoder
3. Power on the unit
4. Release the CONTROL Shaft Encloder after a few seconds
Your PC should make an audible sound when this process is successful as
windows is detecting a new USB device.
5. Loading the firmware
Now open DfuSe Demo.
If the GS-MPI005HD MKII successfully entered DFU mode then it will appear
as ‘STM Device in DFU Mode’ under the ‘Available DFU Devices tab’.
Now the .dfu file needs to be selected so that DfuSe Demo knows the correct
firmware to put on to the STM32 Device.
Figure 3 Device successfully recognised
