Page
26
of
52
Display Settings
Just two options are available when in the display settings menu.
When adjusting the Brightness of the display a fader appears on the screen. This
fader can be operated either by using the touchscreen or by using the ‘Control Shaft
Encoder
’
When ‘ticked’ the Backlight fade enable automatically slowly dims the backlight to
reduce the GS-
MPI005HD’s screen presence in a studio when it is not in use.
As soon as the display is touched, the Control Shaft Encoder used or an incoming
call is detected the display returns to its pre-set brightness level, before gently fading
again.
