Page
17
of
52
DIVERTING/ TRANSFERRING A CALL BETWEEN THE HANDSET &
XLRs
The audio to/ from the mobile phone only ever appears on either the optional
handset interface or the rear panel XLRs (or the Dante® network audio equivalent of
the above). It never appears on both circuits at the same time.
When you make or answer a call the audio will automatically appear on the circuit
that you use. If you use the touchscreen to initiate the call then the call’s audio will
appear on the rear panel XLRs
(called ‘BROADCAST’ in the transfer menu) and if
you use the handset the call’s audio will appear on that.
When a call is in progress the touchscreen will show the following screen
Use the divert/
transfer icon to
display the
current setting
If you’ve answered
the call on the
handset you’ll see
this option.
Note:
As soon as you
press the ‘Transfer
to broadcast’ the
audio will route to/
from the XLRs/
Dante broadcast
circuit
