Glen Dimplex Koolant Koolers WO2-2-10000, Руководство пользователя

Страница: 26 / 53

Operation
20
Controller
7.2.1 Initialization of Controller:
When the unit is first powered up after a download it goes through a self-test and requires a reboot after
initialization. Cycle power to the controller if the message in
Error! Reference source not found. is displayed. W
hen the controller has finished its initial self-test, the Home Page will be displayed. This displays the current
time, date, unit #, fluid temperature, setpoint and system status. The page will look like
Error! Reference source n
ot found. .
7.2.2 Starting the System:
The system status displays the current status of the on/off switch. To turn the system on:
•
Press the “Prg” key and the Program Main Menu will be displayed over three screens ( Error! Reference s
ource not found. , Error! Reference source not found. , & Error! Reference source not found. )
•
Highlight the menu labeled “A. ON/OFF Unit” and press the “Enter” key. The next page will look similar
to Error! Reference source not found.
•
Press the “Enter” key again, to move the cursor over the “SWITCH OFF”
•
Press the “

” key to change the status to “SWITCH ON”
•
Pr ess the “Enter” key to turn the machine on
7.2.3 Enabling Devices:
The pump and compressors can be individually enabled using the Enable/Disable function. To enable/disable
devices:
•
P ress the “Prg” key to view the main menu.
•
Highlight the menu labeled “G. SERVICE” and press the “Enter” key.
•
Use the arrow keys to highlight the menu labeled “C. ENABLE/DISABLE” and press the “Enter” key again
•
The first page should display the Process Pumps similar to Error! Reference source not found. . The three o
ptions for process pumps are:
Auto = Selects pump based on time and switches on flow alarm (if enabled) & overload alarm
#1 = Selects only pump #1 to run
#2 = Selects only pump #2 to run
Once the Process Pumps have been selected, press the “

” arrow key to change the page to Circuit #1. To
enable the compressor(s), use the “Enter” key and the arrow keys to change the status from “No” to “Yes”.
Complete for any additional circuits on the unit. The number of compressors and circuits will depend on the
design of the unit.