Glen Dimplex Koolant Koolers WO2-2-10000, Руководство пользователя

Страница: 22 / 53

Installation
16
WARNING
All plumbing connections should be performed only by properly trained and
certified operators wearing proper protective gear and using appropriate tools.
Failure to correctly install plumbing fittings can lead to leaks, loss of coolant,
and/or water damage to nearby equipment.
NOTICE
Ferrous and galvanized steel fittings are incompatible with the coolant. Brass,
plastic or stainless-steel fittings are recommended. The use of incompatible
materials will lead to excessive corrosion.
Coolant Reservoir Filling
When the chiller’s plumbing connections have been completed the reservoir must be filled with 50% water and
50% glycol.
To fill the chiller’s coolant reservoir:
1. Remove the tank fill port cap.
2. Fill the reservoir with 50% water / 50% glycol. The fluid level should be between the high and low tank
level labels.
3. The tank low level mark is the “break” point for the float switch
4. The chiller’s reservoir capacity is 80 gal (300L).
5. Reinstall the reservoir fill port cap and hand tighten.
Figure 9: Reservoir Visual Level Indicator Marks
FLUID INLET 2” FPT
FLUID OUTLET 2” FPT
TANK HIGH LEVEL
TANK LOW LEVEL