44
05-06 11-12 17-18 23-24
Normal temperature
• The desired temperature for when the room
is in use.
Economy temperature
• The desired temperature for when the
room is not in use, or at night whille you
sleep. CT- suggests 17°C.
Column chart
The column chart provides two kinds of in-
formation: Normal or economy temperature
settings, and on/off periods, that have been
chosen at different times.
1. Tall and short columns
Normal temperature, and when relays are
switched on, is denoted by tall columns in
a 24-hour diagram. Economy temperature,
or when relays are switched off, is denoted
by short columns.
2) Daily cycle of temperature or relay-on/off
The chart has 24 columns, one for each
hour of the day. The first column from the
left represents the hour from 00:00 (mid-
night) to 01:00 (1 a.m.).
Menu
When the system is operating normally, this
is shown in the display.
Displayed is the day of the week (1 = Mon-
day), the time and “MENU”.
See/change programme
Is used if you wish to review the current
daily cycle for a zone or day. You may make
changes to the daily cycles or temperature
settings.
Temporary override
Is used during e.g. holidays. You may set a
specific temperature or switch off relays for a
specified period. Limited to 99 days and 99
hours.
Link up
Before thermostats or relays can be regulated
by CT-, a procedure must be undertaken to
link each receiver to the transmitter in your
CT-. When this is done, only your CT- may
control the units in question. During link-
ing up, the CT- remote control must be taken
around to where the various thermostats are
situated – and the batteries in CT- must there-
fore be fully charged.
Explanation of terms used
Содержание CT Series
