Glamox CT Series, Руководство пользователя

Страница: 24 / 48

24
Description of relay unit (CO-e)
1. Main switch (0/1). Plug for wall socket
acts as main switch.
2. Function key. The function key “F” has
several uses:
• To link up the relay unit to your CT- re -
mote control. See the section on linking
up.
• To make CO-e receive commands from
the CT- remote control or not.
3. Lamp for radio reception. When CO-e is
linked to CT- and the green lamp is lit, the
unit is being regulated by CT-.
4. Local control. If you wish to regulate
CO-e by means of its own controls alone,
the green lamp for radio reception must be
dimmed (controlled by the “F” key). Using
the key, CO-e may now be switched on
and off.
5. Lamp for “on/off”. The red lamp by the
key lights when the unit is switched on.
6. Control of zone linking. Linking to a
zone may be controlled by pressing in the
“F” key and then the key whilst “F” is
held in. Release both keys. The red lamp
( lamp) will afterwards flash a certain
number of times denoting which zone the
unit belongs to.
1 flash = relay zone 17
2 flashes = relay zone 18
…and so on up to…
8 flashes = relay zone 24
8. Central locking. If the relay unit’s lamps
are both flashing (both lamps flash for
appr. five seconds), the unit is locked at
CT- to avoid tampering. It may be un-
locked only at CT-.