Glamox CT Series, Руководство пользователя

Страница: 34 / 48

34
Choosing manual control
To go over to manual control, first press the
joystick t for more than 5 seconds
until the hand symbol appears. Release the
joystick and press t or – to switch
the relay on or off. This status will then
continue until it is manually switched over,
or until it is activated again by the remote
control.
Menu 1 – [1rF] – link up to the remote control CT
For SX with programme version 1.0 [sF 1.0].
On SX, press in and hold down the joystick until the display shows the symbol 1rF. Press
the joystick once and 1rF flashes. As long as CT is in link-up mode, SX will now link
itself to CT and display first the selected zone, then the relay status, ON.
This is the only active menu for SX.
To return from manual override back to
remote control, press the return button and
the antenna symbol denoting remote con-
trol appears. The relay is again controlled
by the remote control CT, which transmits
signals every 12 minutes to keep all receivers
updated.
Menu options