4
1
2
3
4
5
6
7
8
1
Use the adhesive mounting
template to position the sensor
correctly. The grey area indicates
the detection range.
Drill 4 holes as indicated on the
mounting template. Make a hole
for the cable if possible.
Pass the cable +/- 10 cm though
the cable opening. If drilling an
opening is not possible, use the
cable conduits on the back side of
the bracket.
Position the bracket and fasten
the 4 screws firmly in order to
avoid vibrations.
Close the protection cover and
fasten it firmly.
Turn the sensor until the two
triangles are face to face.
Position the housing on the
bracket.
MOUNTING
Open the protection cover, plug
the connector and position the
cable in the slit.
Left Side Mounted
A,C
B,D
B,D
A,C
Right Side Mounted
