GIULIANO Crossage, Инструкция по эксплуатации и обслуживанию

Страница: 40 / 50

40
PROBLEM CAUSE SOLUTION
The hook that unlocks the structure of the
bead breaker does not open
1) No pneumatic supply
2) Control valve broken
3) Silencers obstructed
4) Cylinder gasket broken
5) Pilot valve broken or malfunctio -
ning
1) Check the line pressure
2) Replace the valve
3) Clean the silencer or replace
4) Replace the gaskets
5) Replace the pilot valve
The tool does not move vertically 1) No pneumatic supply
2) The supply fitting is not connected
correctly
3) Supply pipes broken or squashed
4) Control valve broken
5) Silencers obstructed
6) Cylinder gasket broken
1) Check the line pressure
2) Insert the fitting correctly in
the supply socket or check the
pipe route
3) Replace the supply pipes
4) Replace the valve
5) Clean the silencer or replace it
6) Replace the gaskets
The wheel positioner does not move or it
moves slowly
1) No pneumatic supply
2) Control valve broken
3) Silencers obstructed
4) Cylinder gasket broken
1) Check the line pressure
2) Replace the valve
3) Clean the silencer or replace it
4) Replace the gaskets
The wheel positioner does not stop its
stroke
1) Control valve broken
2) Pedal return spring broken
1) Replace the valve
2) Replace the spring
The machine does not inflate 1) No pneumatic supply
2) Control valve broken
3) Pressure limiter valve broken
1) Check the line pressure
2) Replace the valve
3) Replace the valv
The vertical arm does not move or it mo -
ves slowly or too fast
1) Silencers obstructed
2) Silencers not regulated
3) Pedal return spring broken
4) No pneumatic supply
5) Arm stands too loose or too tight
1) Clean or replace the silencers
2) Adjust the silencers
3) Replace the pedal spring
4) Check or restore the pneuma -
tic supply
5) Adjust the arm stands
The tool touches the rim while working 1) Clamping plate not adjusted or
faulty
2) Spindle clamping screw loose
3) Plate unlocking springs broken
1) Adjust or replace the clamping
plate
2) Tighten the screw
3) Replace the plate unlocking
springs