GIULIANO Crossage, Инструкция по эксплуатации и обслуживанию

Страница: 33 / 50

33
Flangia FPM/345
(for clamping rims with back-to-front channel, in other words, rims with the
channels opposite the flanging of the rim)
Select the pins of the shape and length required
and secure them on the connecting rods. Secure
the flange on the spindle, making sure to position
it carefully and secure it with the 2 knobs supplied.
Take the gauge supplied and measure the centre
distance of 2 holes and block this measurement
on the gauge.
Turn the pins of the flange to match-up the cen-
tre distance with the measurement made earlier
on the rim.
Tighten the securing screws of the pins.
Insert the wheel, matching-up the clamping holes
with the threaded pins, positioned with the flange
facing downwards, tighten with the pin and nose.
The flange FPM/345 can be used on all wheels with any number of clamping holes.
Position the pins based on the number of holes on
the rim, inserting the driving pin in the slot and the
securing screw in the threaded hole in the number
desired.
NB: The pin with the yellow screw must never
be removed.