System 3000
Blind timer and timer BT, Operating top unit BT
Parameters
Setting options,
Default setting
Explanations
Night mode
On, Off
Default setting: Off
In night mode, the status LED is not perman-
ently lit, but only for 5 seconds after a button is
pressed.
Disabling function On, Off
Default setting: Off
The disabling function disables extension op-
eration and operation via the app and deactiv-
ates automatic operation. Manual operation
using buttons (3a) and (3b) continues to be
possible.
EnOcean switch
MAC address
Name
Single rocker
Left rocker
Right rocker
The Bluetooth wall transmitter must be con-
nected to the device in order to be able to op-
erate it. Enter the MAC address of the
Bluetooth wall transmitter here, select the
device button to be used for operation and as-
sign a name. Up to 8 Bluetooth wall transmit-
ters can be connected to the device.
Settings for all switch and dimming inserts
Parameters
Setting options,
Default setting
Explanations
Activate call func-
tion
On, Off
Default setting: Off
The function enables a person to attract atten-
tion if required. If the function is activated, a
call can be triggered via a 2-wire extension,
Bluetooth wall transmitter or push-button. If a
call has been triggered, the lighting flashes (1
second on, 1 second off) until the call is ac-
knowledged by actuating any button on the
device. A triggered call overrides all functions
of the device. The functions continue running
in the background so that the device switches
to the respective current state after acknow-
ledgement.
Settings only for dimming inserts, DALI Power control unit
Parameters
Setting options,
Default setting
Explanations
Switch-on bright-
ness
1 ...100 %
Default setting: 100%
During brief operation, the output switches on
at the set switch-on brightness. Note: If the
value is above the set maximum brightness or
below the minimum brightness, then the sys-
tem will switch to the appropriate limit value.
Maximum dim-
ming value
75 ...100 %
Default setting: 100%
Specifies the maximum settable brightness.
Minimum dim-
ming value
1 ... 67 %
Default setting: 5%
Specifies the minimum settable brightness.
Colour temperat-
ure
Minimum colour temperat-
ure
2000 ... 4500 K
Minimum colour temperature: Defines the min-
imum colour temperature that can be set.
Maximum colour temperature: Defines the
8 / 12
32598122
10868257
06.07.2022
