System 3000
Blind timer and timer BT, Operating top unit BT
Activating/deactivating the disabling function (only 2-gang cover)
The disabling function disables extension operation and operation via the app and deactivates
automatic operation. Manual operation using buttons (3a) and (3b) continues to be possible.
With Venetian blinds, extension operation in the "UP" direction (wind alarm) continuous to
be possible.
￭
Press the button (4a) for longer than 4 seconds.
The disabling function is activated or deactivated.
The function LED (5) turns red if the disabling function is active.
The disabling function can also be set with the app (parameter list). With the 1-gang
cover, the status LED (6) is illuminated when the disabling function is active.
Activating/deactivating night mode (only 2-gang cover)
In night mode, the status and function LEDs are not permanently lit, but only for 5 seconds after
a button is pressed.
￭
Press the buttons (4a) and (4b) for longer than 4 seconds.
Night mode is activated: The function LED turns red for 3 seconds.
Night mode is deactivated: The function LED turns green for 3 seconds.
With the 1-gang and 2-gang covers, the night mode can be set with the app (parameter
list).
Call function
The function enables a person to attract attention if required. A call can be triggered via a 2-wire
extension, Bluetooth wall transmitter or push-button.
Precondition: The call function has been activated via the app.
￭
Press the button of the extension.
Light flashes (1 second on, 1 second off) until the call is acknowledged by actuating any
button on the device.
Resetting the device to the factory setting
￭
Press the buttons (3a) and (3b) during the first 2 minutes after switching on the mains
voltage for longer than 20 seconds until the red status LED flashes quickly.
￭
Release buttons (3a) and (3b) and press briefly once again within 10 seconds.
The red status LED flashes more slowly for approx. 5 seconds.
The device is reset to default setting (default setting). The blue LED flashes three times to
indicate that the time is not set.
On a Venetian blind insert, a reference run to the upper end position is performed.
After resetting the device to the default setting, it has to be removed from the app.
On iOS equipment, the device also has to be removed manually from the list of paired
Bluetooth devices (Settings/Bluetooth). Otherwise, re-pairing will not be possible.
9
Information for electrically skilled persons
DANGER!
Mortal danger of electric shock
Disconnect the device. Cover up live parts.
Mounting the device
Switching, dimming or Venetian blind insert or 3-wire extension are mounted and connected
properly (see instructions of the relevant inserts).
6 / 12
32598122
10868257
06.07.2022
