3. CHECKS & ADJUSTMENT
3-7
Air Filter Service
It is recommended that the air filter be replaced annually.
When riding in extremely dusty conditions replacement
will be required more often.
The filter should be inspected periodically before each
ride, using the following procedure.
The air box is located rearward of the engine.
1. Remove clips from air box cover and remove cover.
Inspect the gasket. It should adhere tightly to the cover and
seal all the way around.
2. Remove air pre-filter assembly. Do not clean the main
filter, the filter should be replaced.
3. Inspect main element and replace if necessary. If the filter
has been soaked with fuel or oil it must be replaced.
Installation
1. Reinstall the filter into the air box container. Be sure the
filter fits tightly in the air box.
NOTE: Apply a small amount of general purpose
grease to the sealing edges of the filter before
installing.
2. Check air box. If oil or water deposits are found, drain them
into a suitable container.
NOTE: Service more frequently if vehicle is operated
in wet conditions or at high throttle openings for
extended periods.
3. Install air box cover and secure with clips.
1.JOINT,AIR CLEANER
2.
CIRCLIP
3.
PRIMARY COVER 4. FILTER ELEMENT
5. TAIL COVER
Содержание Vyper 4WD 1100cc 4 seater XY1100UEL
