User Manual for Vital Signs Monitor
33
Screen Description:
“Volume”:
set beeper volume, “1~7” level adjustable, the factory default is 03. It is recommended
that the alarm volume shouldn’t be adjusted lower than the factory default value unless the nursing
personnel keeps close attention and surveillance on the patients and the device at all times.
“key beep”:
to turn on/off key beep;
“Language”:
language selection. “ENG” for English.
“priority”:
priority of “PR” value or “HR” value display. The default set is “HR”.
“care mode”:
“Demo” shows the demo waveforms and data. In the demo state, all the signals and
data are generated from the monitor for demonstration and testing purpose. When the mode “Demo” is
selected, the user can test whether the visual and audible alarm system runs normally by raising or
lowering the alarm limit to trigger the monitor to alarm.
“Real” shows the real time waveform, i.e. normal monitoring status;
BT sound:
adjust the volume of pulse beeping sound. “0~7” level adjustable. “0” means switching off
the sound.
4.7.6 Patient Info
Figure 4.16 Patient Info Screen
Screen Description:
“ID”:
change or set current patient’s ID number, 0~100 adjustable;
“category”:
change or set the category of current patient; three options “adult” ,“pediatric” and
“neonate”, the default is “adult”.
Note:
If the patient ID is changed, the history data (except NIBP list) will be cleared, that means SpO
2
trend graph and HR trend graph will become empty.
