3
2) Connect the connector labeled LEFT
of the controller with the left one of the motor.
Connect the connector labeled RIGHT
of the controller with the right one
of the motor. (See illustration 6)
6. Powered Wheelchair Operation
1) Turn on the power supply switch I/O, then
the power indicator light is on. When the first
power volume indicator light on the right is on,
it means the power is enough.
2) The driving speed can be adjusted by the
speed adjust knob on the controller.
The low starting speed is suitable.
3) Hold the handle to start slowly.
Push the handle forward, the wheelchair
moves forward; move the handle
to the left, it moves to the left; move
the handle to the right, it moves
to the right, move the handle backward,
it moves backward.
4) Press the trumpet button to make alarm.
7. Push By Assistant
When the power is not enough, move the clutch
switch, the wheelchair release the brake, it can
be pushed by assistant. (See illustration 7)
8. Charge
1) Please charge the battery with specified charger
coming with the powered wheelchair for safety.
Plug the outlet of the charger into the charge
jack in the back of the controller.
2) Plug the outlet of the charger in the suitable
power supply.
3) The power indicator is on and the charge
indicator is on, charge begins.
4) When the charger indicator is on, the power of the battery is sufficient.
(The charge time depends on how much power is left in the battery.
A newstorage battery needs to charge 12-14 hours for the first time.)
After charge, take out the outlets of the power supply and charge output.
9. Lighting lamp
Operate the on/off button to turn on or turn off the lighting lamp.
The button is under the armrest. (See illustration 8)
IllustratIon 6
IllustratIon 7
IllustratIon 8
PG
MOTOR
MOTOR
BATTERIES
