background image

6

The battery needs charging or there is a bad
connection to the battery. Check the connections
to the battery. If the connections are good,
try charging the battery.

The left hand motor has a bad connection. 
Check the connections to the left hand motor. 

The left hand motor has a short circuit to a battery
connection. Contact your service agent. 

The right hand motor has a bad connection.
Check the connections to the right hand module.  

The right hand motor has a short circuit to a
battery connection. Contact your service agent.

The wheelchair is being prevented fromdriving
by an external signal. The exact cause will
depend on the type of wheelchair you have, 
one possibility is the battery charger is connected.

A joystick fault is indicated. 
Make sure that the joystick is in the center position 
before switching on the control system.

A control systemfault is indicated. Make sure
that all connections are secure. 

The parking brakes have a bad connection.
Check the parking brake and motor connections.
Make sure the control system connections are
secure. 

An excessive voltage has been applied to the
control system. This is usually caused by a poor
battery connection. Check the battery
connections.

A comunication fault is indicated. 
Make sure that joystick cable is securely connected 
and not damaged.

Flashing bars

number

TROUBLESHOOTING GUIDE

1

2
3
4
5

6

7

8

9

10

7+S

Содержание 27729









Отзывы: