Castor
Light
2
2. Battery Installation
When the batteries need to change,
put two new storage batteries to the
same direction in the battery box.
Connect the anode of A battery
and the cathode of B battery with
a short wire. Connect the anode of B
run with the red short wire,
and the cathode of A battery with the
blue short wire. Then cover the battery box.
3. Battery Box Installation
1) Open the wheelchair, lift the battery box,
then hang the hooks of the box
to the battery box support pole.
2) Connect the power connector of the
controller with the one of batteries box.
4. Backrest angle adjusting
You would better adjust the backrest angle
before using the wheelchair or do this
operation by assistant. Just unscrew the
adjustable knob, choose the right angel you
want, fasten the knobs after any adjustment.
(See illustration 4)
5.Controller Installation
1) Insert the controller support to the controller fixing cover beside
the armrest, adjust the position of the controller and fasten the screw nut.
(See illustration 5)
1. Outer Dimension
1020(L)X650(W)X990(H)mm
10. Over Obstacle
40mm
2. Light
24V 5W
11. Stop Distance
1 m
3. Net Weight
50kg
12. Running Distance
20km
incl. Batteries
Per Charging
4. Capacity
Max: 110kg
13. Noise
≤65dBA
5. Castor Diameter
200mm (8 )
14. Power Spec
2x12V=24V,
24Ah
6. Driving Wheel
330mm (12.5 )
15. Get Over Channel
≤100mm
7. Seat Width
400(L)x410(W)mm
16. Motor Spec
168Wx2
8. Speed
0-6km/h
17. Charging Current
3.5A
9. Creeping Capacity
12°
18. Charging input
AC 220V
IllustratIon 4
IllustratIon 5
taBlE 1 maIn paramEtErs
