1
The powered wheelchair is easy to
use.
The user can make the powered
wheelchair move forward, backward
or turn round and round in the same
place only by the controller. When
the power is not enough, it can be
used as the transit wheelchair. The
seat cushion is detachable.
Accessories: Charger 1 pc, storage
batteries 2 purchase.
1. Chair Frame Installation
1) Remove the footplate just adjust the locker, then swing the footplate
to the side, pull up the footplate until it is out of the chair frame fully
2) Put the footplate to the chair frame by side, push it towards
the wheelchair until it is locked firmly in the chair frame.
(See illustration 2)
3) Install the anti-tiper and insert the pin. (See illustration 3)
I. PRODUCT INTRODUCTION
II. INSTALL AND USE
Handle
Controller
Anti-tipper
Power wheel
Footrest
Castor
Light
Armrest
IllustratIon 1
IllustratIon 2
IllustratIon 3
