Gilson Centry 117, Руководство пользователя

Страница: 7 / 16

7 CENTRY™ 117 MiCRoCENTRifugE | uSER’S guiDE
iNSTALLATioN
|
CENTRY™ 117 MiCRoCENTRifugE
Operation
Before operating the CENTRY 117 Microcentrifuge:
1. Check that the power source (electrical outlet on the wall)
corresponds to that on the manufacturer’s rating label.
2. Connect the power cord to the CENTRY 117 Microcentrifuge
and the power source.
WARNING
Never attempt to operate the CENTRY 117 Microcentrifuge
with rotors or adapters that show signs of corrosion or
mechanical damage.
Never centrifuge strongly corrosive materials that may
damage the rotors, accessories, or bowl of the unit.
Attach Rotor Lid
After the rotor has been properly secured and loaded, attach
the rotor lid to the rotor. Always use the rotor lid for safety and
to allow the rotor to reach proper speed. Make sure that the
rotor lid snaps securely into place.
NOTE
The CENTRY 117 Microcentrifuge locks when closed and the
start button is pressed.
Lid Lock
The lid will remain locked during a centrifuge run. once the
run has been completed and the rotor has come to a stop,
a beep will indicate the end of a run, and the lid will unlock
automatically.
WARNING
Do not attempt to open the lid of the CENTRY 117
Microcentrifuge until the rotor has come to a complete stop.