Gilson Centry 117, Руководство пользователя

Страница: 14 / 16

14 CENTRY™ 117 MiCRoCENTRifugE | uSER’S guiDE
TRouBLESHooTiNg
|
CENTRY™ 117 MiCRoCENTRifugE
Lid lock will not release
Defective lid lock
Open manually and
have unit serviced
No power from PC
board
Call for service
Lid lock is jammed Call for service
Microcentrifuge is not
receiving power
See
CENTRY 117
Microcentrifuge will
not start on page
13
Microcentrifuge cannot
be started, although
power is on
Lid not closed
correctly
Close lid correctly
No speed or time has
been selected
Set speed and/or time
ERRoR# LABEL CAuSE
1 Lid Open Trying to start when lid is open
2 Lid Unlock
Trying start when lid lock not able to
lock
3 Lid Stuck At stop, lid will not open and is “stuck”
4 Motor Stall Motor is not spinning
5 OV/UV/OC
Over voltage, under voltage, or over
current
6 Motor Imbalance Motor spinning imbalance
7 COMM. Error
Display could not communicate with
power board, cable is bad or not
connected, or noise issue
8 Over Temperature Output stage temperature is too high