GILES EOF Series Скачать руководство пользователя страница 86

Страница: 86 / 128

Fryer Operation

EOF SERIES FRYERS

Never attempt to pump cold shortening. Doing so can clog the filter pump and damage the unit. Oil must be

heated to at least 200°F (93°C) before attempting to pump.

During the next steps cooking oil is drained

from the vat, exposing the heating

elements. Even though safety interlocks are in place, failure

to place the HEAT Switch in the [OFF] position before draining

could result in fire. ALWAYS CONFIRM THAT THE HEAT

SWITCH IS [OFF] BEFORE DRAINING COOK VAT.

•

Never drain more than one (1) vat at a time into the Filter

Pan! The pan only has capacity to hold the oil from one (1)

cook vat.

•

Never disconnect and attempt to remove the Filter Pan from

unit while it contains cooking oil.

1. If cooking oil is cold, heat to at least

200°F (93°C)

2. Confirm the Power Switch

①

and Heat Switch

②

are in the

[OFF]

position.

3. Be sure the Filter Pan

③

and the Filter Pan Cover

④

are in

place. Confirm the Filter Pan Hose

⑤

is properly connected

the to unit. Verify the Pump Discharge Valve Handle

⑥

inside the FFLT Cabinet is in the

[TO FRYER]

position.

5. Slowly unlock and pull the Drain Valve Handle

⑦,

of the

Fryer unit being serviced, to the

[OPEN]

position and allow

ALL

oil to completely drain into the Filter Pan.

EOF-20 or EOF-24

EOF-10-10

5.4.

Removal of Waste Cooking Oil from Fryer

This section explains the procedure for removing waste cooking oil from Fryer for disposal. Oil must be removed

before a

Boil-Out procedure

can be performed. In this section a Giles Oil Caddy

(not included)

is depicted for oil

disposal; any suitable disposal system can be used.

Continued on Next Page

Содержание EOF Series

































































































































Результаты поиска

Содержание EOF Series

Отзывы:

Похожие инструкции для EOF Series

Бренды по названию

Популярные бренды

GILES EOF Series, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание EOF Series

Отзывы:

Похожие инструкции для EOF Series

Бренды по названию

Популярные бренды