GILES EOF Series Скачать руководство пользователя страница 80

Страница: 80 / 128

Fryer Operation

EOF SERIES FRYERS

13. When cook Baskets are used, it is recommended that uncooked product be placed into them before placing into

the hot oil, while held on either Basket Lift Carrier or Basket Hanger. Basket Lift automatically lowers product

into oil when cook cycle is started. Uncooked product may also be placed into Baskets after they are placed

into oil.

Some Users prefer to use a “batch” cooking method for high-volume operations. In such cases, Baskets are not

used. Product is dropped directly into oil and then remove with a scoop-style basket when done.

10. Check the oil level, it should now be at the

FULL

Mark

⑪

. Add shortening if

needed and stir. If the

HEAT

light turns

after adding additional oil,

continue stirring until it turns

OFF

again before cooking.

11. Place the Fry Screen

⑫

into vat with the handles to the side.

12. If Basket Lift option is installed, place the Cooking Baskets

⑬

onto

the Basket Carriers

⑭

, otherwise hang baskets on Hanger Bars.

NOTE: Basket Lift Models:

If not desiring to use the Basket Lifts, move Lifts to the raised position

and use Basket Carriers

⑭

as Hangers.

During cooking operations, oil level MUST be maintained above the indicated minimum (ADD) level. If not

maintained above that level, controller alarms will likely occur and heating elements may shutdown. Condition

can also cause smoking and poor food quality.

5.2.

Cooking Procedure - continued

Continued on Next Page

Содержание EOF Series

































































































































Результаты поиска

Содержание EOF Series

Отзывы:

Похожие инструкции для EOF Series

Бренды по названию

Популярные бренды

GILES EOF Series, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание EOF Series

Отзывы:

Похожие инструкции для EOF Series

Бренды по названию

Популярные бренды