GILES EOF Series Скачать руководство пользователя страница 84

Страница: 84 / 128

Fryer Operation

EOF SERIES FRYERS

•

Never drain more than one (1) vat at a time into the Filter Pan! The pan only has capacity to hold the oil from

one (1) cook vat.

•

Never disconnect and attempt to remove the Filter Pan from unit while it contains cooking oil.

During the next steps cooking oil is drained from the vat, exposing the heating elements.

Even though safety interlocks are in place, failure to place the HEAT Switch in the [OFF]

position before draining could result in fire. ALWAYS CONFIRM THAT THE HEAT SWITCH IS [OFF] BEFORE

DRAINING COOK VAT.

NOTE:

If oil does not readily drain, use the provided Drain Brush and/or Drain

Clean-out Tool to break up crumbs or residue that might be blocking

the vat drain opening.

7. Confirm that

HEAT

Switch for the unit being filtered remains in the

[OFF]

position. In the lower FFLT Cabinet ensure the Pump Diverter

Valve Handle

⑤

is in the

[OIL RETURN]

position.

On the unit being filtered:

Unhook and slowly pull Drain Valve Handle

⑥

out to the

[OPEN]

position. Cooking oil should begin draining into

the Filter Pan.

On the Fryer unit being filtered:

Set the Oil Return Valve handle

⑦

to the

[VAT FILL]

position.

IMPORTANT!

Oil Return Valves on all other vats MUST be in the [CLOSE] position.

9. Allow

ALL

oil to completely

drain into the Filter Pan then

place the Pump Switch

⑧

the FFLT Panel to the

[ON]

position.

5.3. Filtering Used Cooking Oil - continued

Continued on Next Page

Содержание EOF Series

































































































































Результаты поиска

Содержание EOF Series

Отзывы:

Похожие инструкции для EOF Series

Бренды по названию

Популярные бренды

GILES EOF Series, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание EOF Series

Отзывы:

Похожие инструкции для EOF Series

Бренды по названию

Популярные бренды