Gilera Nordwest, Руководство по ремонту

Страница: 70 / 136

DISASSEMBLY
Make sure all necessary components are removed, then remove all bolts that
join the two halves of the cases. Open the crankcase and if necessary use a
plastic or rubber mallet to loosen it (carefully hit at the joint of the cases and/or
at the end of the gearbox shafts).
When separating the cases (fig. 1), check to see if a spacer washer (from one
of the shafts) has fallen out; reinstall if necessary.
Slide out the gear selector fork shaft and remove the forks (fig. 2).
Remove the selector drum, balance shaft and the two gear train shafts (figs. 3-
4-5).
Remove crankshaft with connecting rod (fig. 6). Loosen the nuts of the
connecting rod caps and remove the connecting rod from the shaft (fig. 7).
10 - 2,1