Gilera Nordwest, Руководство по ремонту

Страница: 43 / 136

DISASSEMBLY
Remove generator cover mounting bolts together with stator and remove cover
(fig. 1).
Remove the timing belt cover; loosen idler roller nut and position the idle roller
in such a way as to permit the belt to come off the cam pulleys (fig. 2).
Block generator rotor with special tool 19.1.20521, then loosen the mounting
bolt (fig. 3).
Protect the crankshaft end with the threaded pad (special tool 19.1.20513) and
remove the generator rotor with the extractor 19.1.20501 (figs. 4-5-6).
Pull off the two spring washers and the large guide washer from the crankshaft
end. Remove the timing belt (figs. 7-8).
Loosen the block side cover mounting bolts and remove cover (fig. 9).
Slide out the gearshift pedal shaft, together with selector drum assembly (fig.
10).
Remove selector drum cam central bolt (fig. 11).
Remove crankshaft pinion using extractor 19.1.20514 (figs. 12-13).
Remove the electric starter’s freewheel/driven gear, complete with bushing
and caged needle bearing, from the balanced auxiliary shaft after having
removed its fastening bolt and spring washer. Lastly, remove the triangular
shaped washer (figs. 14-15-16).
6 - 1,1