Important Safety Information
Page 8
MDE-4133B Power Supply Kit M00016K003 Installation Manual • November 2003
Other Useful Safety Information
This subsection provides additional safety information.
OSHA Lock-Out and Tag-Out Requirements
OSHA Standard 29 CFR 1910-147 Control of Hazardous Energy Sources (Lock-Out/Tag-Out)
covers ways to avoid personal injury because power was turned on or fuel pressure was
applied unexpectedly while servicing equipment. The rule requires:
(1) Turning off equipment power and fuel under pressure.
(2) Use of a locking device (breaker, valve, etc.) or label device with a warning tag.
Station employees and service contractors need to understand and comply with this program
completely to ensure safety while the equipment is down.
Use Electrostatic Discharge Precautions
Place yourself at a neutral static-free potential by doing the following:
1
Touch an unpainted metal surface.
2
Use a wrist strap connected to a grounded metal frame or chassis.
3
Make sure all power has been removed from unit and the CRIND device.
