GILBARCO VEEDER-ROOT M00016K003, Руководство по установке

Страница: 15 / 30

MDE-4133B Power Supply Kit M00016K003 Installation Manual • November 2003 Page 15
Installation
Installing the M00016K003 Kit
Perform the following steps to install the M02274A001 Power Supply Assembly.
1
Insert four plastic standoffs (Q10651-02) into the new power supply chassis for the new power
supply board (M02774). See
Figure 9 for power supply board location.
2 Insert four plastic standoffs (Q10651-02) into the new power supply chassis for the STP board
(M00047). See
Figure 8 for STP board location.
3
Mount the power supply board on the four plastic standoffs on the power supply assembly
(
Figure 9 ).
4 Mount the M00047A001 STP board on four plastic standoffs ( Figure 5 and Figure 8 ).
Figure 8: Power Supply Assembly M02274A001 - STP Board Location
5 From Side 1 of the unit, position the M02274A001 Power Supply Assembly onto the
electronics shelf where the previous power supply was mounted (hanging from the top
crossbrace). Install the power supply such that the front (
Figure 9 ) of the power supply is
facing Side 2 and the power supply support brackets align with the holes in the unit’s frame.
Power supplies are heavy. Handle with care to avoid personal injury. Also handle with
care to avoid dropping the unit and causing possible equipment damage.
CAUTION
!
STP board
varistor cable
(M02951A00X)