3.5.2.
QoS Setting - Port, 802.1p, IP/DS Based
This page allows you to enable Port Based, VLAN Tag or IP/DS mode of COS.
Port Base
Set the port priority to high, other ports that are not selected here will be set to low priority. A
packet received by a high priority port is handled as a high priority packet.
VLAN Tag
The switch follows the VLAN tag of the incoming packets to forward traffic.
High Priority:
4~7
Low Priority:
0~3
IP/DS
The switch follows the IP TOS/ Differentiated Services of the incoming packets to forward
traffic.
High Priority:
10, 18, 26, 34, 46, 48, 56
Low Priority:
Others
Button
Update:
Apply all the settings you’ve made here.
