Gigabyte GA-Z97X-Gaming G1 Скачать руководство пользователя

Страница: 43 / 136

- 43 -

BIOS Setup

Turbo Power Limit (Watts)

Allows you to set a power limit for CPU Turbo mode. When the CPU power consumption exceeds the

specified power limit, the CPU will automatically reduce the core frequency in order to reduce the power.

Auto

sets the power limit according to the CPU specifications. (Default: Auto)

Core Current Limit (Amps)

Allows you to set a current limit for CPU Turbo mode. When the CPU current exceeds the specified current

limit, the CPU will automatically reduce the core frequency in order to reduce the current.

Auto

sets the

power limit according to the CPU specifications. (Default: Auto)

No. of CPU Cores Enabled

(Note 1)

Allows you to select the number of CPU cores to enable in an Intel

multi-core CPU (the number of CPU

cores may vary by CPU).

Auto

lets the BIOS automatically configure this setting. (Default: Auto)

Hyper-Threading Technology

(Note 1)

Allows you to determine whether to enable multi-threading technology when using an Intel

CPU that

supports this function. This feature only works for operating systems that support multi-processor mode.

Auto

lets the BIOS automatically configure this setting. (Default: Auto)

CPU Enhanced Halt (C1E)

(Note 1)

Enables or disables Intel

CPU Enhanced Halt (C1E) function, a CPU power-saving function in system

halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to

decrease power consumption.

Auto

lets the BIOS automatically configure this setting. (Default: Auto)

C3 State Support

(Note 1)

Allows you to determine whether to let the CPU enter C3 mode in system halt state. When enabled, the

CPU core frequency and voltage will be reduced during system halt state to decrease power consumption.

The C3 state is a more enhanced power-saving state than C1.

Auto

lets the BIOS automatically configure

this setting. (Default: Auto)

C6/C7 State Support

(Note 1)

Allows you to determine whether to let the CPU enter C6/C7 mode in system halt state. When enabled, the

CPU core frequency and voltage will be reduced during system halt state to decrease power consumption.

The C6/C7 state is a more enhanced power-saving state than C3.

Auto

lets the BIOS automatically configure

this setting. (Default: Auto)

CPU Thermal Monitor

(Note 1)

Enables or disables Intel

Thermal Monitor function, a CPU overheating protection function. When enabled,

the CPU core frequency and voltage will be reduced when the CPU is overheated.

Auto

lets the BIOS

automatically configure this setting. (Default: Auto)

CPU EIST Function

(Note 1)

Enables or disables Enhanced Intel

Speed Step Technology (EIST). Depending on CPU loading, Intel

EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease

average power consumption and heat production.

Auto

lets the BIOS automatically configure this setting.

(Default: Auto)

Extreme Memory Profile (X.M.P.)

(Note 2)

Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when

enabled.

Disabled

Disables this function. (Default)

Profile1

Uses Profile 1 settings.

Profile2

(Note 2)

Uses Profile 2 settings.

(Note 1) This item is present only when you install a CPU that supports this feature. For more information about

Intel

CPUs' unique features, please visit Intel's website.

(Note 2) This item is present only when you install a CPU and a memory module that support this feature.

Содержание GA-Z97X-Gaming G1









































































































































Результаты поиска

Содержание GA-Z97X-Gaming G1

Отзывы:

Похожие инструкции для GA-Z97X-Gaming G1

Бренды по названию

Популярные бренды

Gigabyte GA-Z97X-Gaming G1, Руководство пользователя

Результаты поиска

Содержание GA-Z97X-Gaming G1

Отзывы:

Похожие инструкции для GA-Z97X-Gaming G1

Бренды по названию

Популярные бренды