Gigabyte GA-Z97X-Gaming G1 Скачать руководство пользователя

Страница: 58 / 136

BIOS Setup

- 58 -

PCH LAN Controller (Intel

GbE LAN Chip, LAN2)

Enables or disables the Intel

GbE LAN function. (Default: Enabled)

If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to

Disabled

XHCI Mode

Allows you to determine the operating mode for the xHCI controller in OS.

Smart Auto

This mode is available only when the BIOS supports the xHCI controller in the pre-boot

environment. This mode is similar to

Auto

, but it adds the capability to route the ports

to xHCI or EHCI according to setting used in previous boots (for non-G3 boot) in the

pre-boot environment. This allows the use of USB 3.0 devices prior to OS boot. xHCI

controller enabling and rerouting should follow the steps in

Auto

, when previous boot

routs ports to EHCI. Note: This is the recommended mode when BIOS has xHCI pre-

boot support. (Default)

Auto

BIOS routes the sharable ports to EHCI controller. Then it uses ACPI protocols to

provide an option to enable the xHCI controller and reroute the sharable ports. Note:

This is the recommended mode when BIOS does NOT have xHCI pre-boot support.

Enabled

All shared ports are eventually routed to the xHCI controller during the BIOS boot process.

If BIOS does not have pre-boot support for the xHCI controller, it should initially route

the sharable ports to the EHCI controller and then prior to OS boot it should route the

ports to xHCI controller. Note: OS has to provide support for the xHCI controller in this

mode. If the OS does not provide support, all sharable ports won't work.

Disabled

The USB 3.0 ports are routed to the EHCI controller and the xHCI controller is turned

off. All USB 3.0 devices function as High Speed devices regardless of xHCI software

support/availability.

Audio Controller

Enables or disables the onboard audio function. (Default: Enabled)

If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to

Disabled

Audio LED

Enables or disables the onboard audio LED. (Default: Enabled)

USB DAC Power

Enables or disables the power for the USB DAC connector on the back panel. For a USB DAC that has

independent power, set this item to

Disabled

. (Default: Enabled)

Intel Processor Graphics

Enables or disables the onboard graphics function. (Default: Enabled)

Intel Processor Graphics Memory Allocation

Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 64M)

DVMT Total Memory Size

Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX.

(Default: MAX)

Intel(R) Rapid Start Technology

Enables or disables Intel

Rapid Start Technology. (Default: Disabled)

Legacy USB Support

Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)

Содержание GA-Z97X-Gaming G1









































































































































Результаты поиска

Содержание GA-Z97X-Gaming G1

Отзывы:

Похожие инструкции для GA-Z97X-Gaming G1

Бренды по названию

Популярные бренды

Gigabyte GA-Z97X-Gaming G1, Руководство пользователя

Результаты поиска

Содержание GA-Z97X-Gaming G1

Отзывы:

Похожие инструкции для GA-Z97X-Gaming G1

Бренды по названию

Популярные бренды