Gigabyte GA-Z97X-Gaming G1 страница 20 Скачать руководство пользователя

Страница: 20 / 136

- 20 -

Hardware Installation

1-7 Back Panel Connectors

USB 2.0/1.1 Port

The USB port supports the USB 2.0/1.1 specification. You can connect a USB DAC to this port or use this

port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc.

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 mouse or keyboard.

DVI-I Port

The DVI-I port conforms to the DVI-I specificationand supports a maximum resolution of 1920x1200@60 Hz

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports DVI-I

connection to this port.

DisplayPort

DisplayPort delivers high quality digital imaging and audio, supporting bi-directional audio transmission.

DisplayPort can support both DPCP and HDCP content protection mechanisms. You can use this port to

connect your DisplayPort-supported monitor. The maximum supported resolution is 4096x2160@24Hz

or 3840x2160@60Hz, but the actual resolutions supported are dependent on the monitor being used.

USB 3.0/2.0 Port

The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification.

Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc.

HDMI Port

The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD

Master Audio formats. It also supports up to 192KHz/24bit 8-channel LPCM audio

output. You can use this port to connect your HDMI-supported monitor. The maximum supported resolution

4096x2160@24Hz or 2560x1600@60Hz

, but the actual resolutions supported are dependent on the

monitor being used.

After installing the HDMI device, make sure to set the default sound playback device to HDMI. (The

item name may differ depending on your operating system. The screenshot below is from Windows 8.1)

In Windows 8.1, select Apps>Control Panel>Hardware

and Sound>Sound>Playback, set Intel(R) Display Audio

to the default playback device.

After installing the DisplayPort device, make sure the default device for sound playback is the

DisplayPort device.

Содержание GA-Z97X-Gaming G1









































































































































Результаты поиска

Содержание GA-Z97X-Gaming G1

Отзывы:

Похожие инструкции для GA-Z97X-Gaming G1

Бренды по названию

Популярные бренды

Gigabyte GA-Z97X-Gaming G1, Руководство пользователя

Результаты поиска

Содержание GA-Z97X-Gaming G1

Отзывы:

Похожие инструкции для GA-Z97X-Gaming G1

Бренды по названию

Популярные бренды