Gigabyte GA-IMB1900N Скачать руководство пользователя

Страница: 34 / 38

2-7 Save & Exit

Save Changes and Reset

Press <Enter> on this item and select

Yes

. This saves the changes to the CMOS and exits the BIOS Setup

program. Select

or press <Esc> to return to the BIOS Setup Main Menu.

Discard Changes and Reset

Press <Enter> on this item and select

Yes

. This exits the BIOS Setup without saving the changes made

in BIOS Setup to the CMOS. Select

or press <Esc> to return to the BIOS Setup Main Menu.

Restore Defaults

Press <Enter> on this item and select

Yes

to load the BIOS factory default settings. The BIOS defaults

settings help the system to operate in optimum state. Always load the Optimized defaults after updating

the BIOS or after clearing the CMOS values.

Save as User Defaults

Save to current BIOS settings as user-defined default settings.

Restore User Defaults

Load the user-define default settings for all BIOS options.

Boot Override

Allows you to select a device to boot immediately. Press <Enter> on the device you select and select

Yes

to confirm. Your system will restart automatically and boot from that device.

Launch EFI Shell from filesystem device

Allows you to launch the EFI Shell application (shell.efi) from one of the available filesystem devices. Press

<Enter> on this option and the system will restart to the EFI Shell screen automatically.

Main

Save Changes and Reset
Save Changes and Reset

  Restore Defaults
  Save as User Defaults
  Restore User Defaults

Boot Override

UEFI: USB 2.0 USB Flash Drive 0.00
UEFI: Built-in EFI Shell

Launch EFI Shell from filesystem device

: Select Screen

: Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Boot

Save & Exit

Security

Chipset

Advanced

- 34 -

Содержание GA-IMB1900N







































Результаты поиска

Содержание GA-IMB1900N

Отзывы:

Похожие инструкции для GA-IMB1900N

Бренды по названию

Популярные бренды

Gigabyte GA-IMB1900N, Руководство пользователя

Результаты поиска

Содержание GA-IMB1900N

Отзывы:

Похожие инструкции для GA-IMB1900N

Бренды по названию

Популярные бренды