ATX
1/2) ATX_12V/ATX (2x2 12V Power Connector and 2x12 Main Power Connector)
With the use of the power connector, the power supply can supply enough stable power to all the components
on the motherboard. Before connecting the power connector, first make sure the power supply is turned
off and all devices are properly installed. The power connector possesses a foolproof design. Connect the
power supply cable to the power connector in the correct orientation.
The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected,
the computer will not start.
To meet expansion requirements, it is recommended that a power supply that can withstand high
power consumption be used (500W or greater). If a power supply is used that does not provide the
required power, the result can lead to an unstable or unbootable system.
ATX:
Pin No.
Definition
Pin No.
Definition
Pin No.
Definition
1
3.3V
9
5VSB (stand by +5V)
17
GND
2
3.3V
10
+12V
18
GND
3
GND
11
+12V (Only for 2x12-pin
ATX)
19
GND
4
+5V
12
3.3V (Only for 2x12-pin
ATX)
20
NC
5
GND
13
3.3V
21
+5V
6
+5V
14
-12V
22
+5V
7
GND
15
GND
23
+5V (Only for 2x12-pin
ATX)
8
Power Good
16
PS_ON (soft On/Off)
24
GND (Only for 2x12-pin
ATX)
3/4) CPU_FAN/SYS_FAN (Fan Headers)
All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design.
When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is
the ground wire). The speed control function requires the use of a fan with fan speed control design. For
optimum heat dissipation, it is recommended that a system fan be installed inside the chassis.
•
Be sure to connect fan cables to the fan headers to prevent your CPU and system from
overheating. Overheating may result in damage to the CPU or the system may hang.
•
These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers.
ATX_12V:
Pin No.
Definition
1
GND
2
GND
3
+12V
4
+12V
ATX_12V
4
2
3
1
DEBUG
PO
RT
G.QBOFM
13
12
1
24
CPU_FAN
SYS_FAN
DEBUG
PORT
G.QBOFM
DEBUG
PORT
G.QBOFM
1
1
CPU_FAN:
Pin No.
Definition
1
GND
2
+12V
3
Sense
4
Speed Control
SYS_FAN:
Pin No.
Definition
1
GND
2
Voltage Speed Control
3
Sense
4
PWM Speed Control
- 13 -
