Gigabyte GA-990FXA-UD7 страница 88 Скачать руководство пользователя

Страница: 88 / 112

Unique Features

- 88 -

5-1-2 Updating the BIOS with the @BIOS Utility

A. Before You Begin

1. In Windows, close all applications and TSR (Terminate and Stay Resident) programs. This helps prevent

unexpected failures when performing a BIOS update.

2. During the BIOS update process, ensure the Internet connection is stable and do NOT interrupt the Internet

connection (for example, avoid a power loss or switching off the Internet). Failure to do so may result in a

corrupted BIOS or a system that is unable to start.

3. Do not use the G.O.M. (GIGABYTE Online Management) function when using @BIOS.

4. GIGABYTE product warranty does not cover any BIOS damage or system failure resulting from an inadequate

BIOS flashing.

B. Using @BIOS

Make sure that the BIOS file to be flashed matches your motherboard model. Updating the
BIOS with an incorrect BIOS file could cause your system not to boot.

Update the BIOS Using the Internet Update Function:

Click

Update BIOS from GIGABYTE Server

, select the @BIOS server site closest to your location and

then download the BIOS file that matches your motherboard model. Follow the on-screen instructions to

complete.

Update the BIOS without Using the Internet Update Function:

Click

Update BIOS from File

, then select the location where you save the BIOS update file obtained from

the Internet or through other source. Follow the on-screen instructions to complete.

Save the Current BIOS File:

Click

Save Current BIOS to File

to save the current BIOS file.

Load BIOS Defaults after BIOS Update:

Select the

Load CMOS default after BIOS update

check box and then the system will automatically load

BIOS defaults after BIOS update and after the system restarts.

C. After Updating the BIOS

Restart your system after updating the BIOS.

If the BIOS update file for your motherboard is not present on the @BIOS server site, please

manually download the BIOS update file from GIGABYTE's website and follow the instructions in

"Update the BIOS without Using the Internet Update Function" below.

Содержание GA-990FXA-UD7

















































































































Результаты поиска

Содержание GA-990FXA-UD7

Отзывы:

Похожие инструкции для GA-990FXA-UD7

Бренды по названию

Популярные бренды

Gigabyte GA-990FXA-UD7, Руководство пользователя

Результаты поиска

Содержание GA-990FXA-UD7

Отзывы:

Похожие инструкции для GA-990FXA-UD7

Бренды по названию

Популярные бренды