Gigabyte GA-990FXA-UD7 Скачать руководство пользователя

Страница: 46 / 112

BIOS Setup

- 46 -

2-5 BIOS Features

Boot Option Priorities

Specifies the overall boot order from the available devices. For example, you can set hard drive as the

first priority (

Boot Option #1

) and DVD ROM drive as the second priority (

Boot Option #2

). The list only

displays the device with the highest priority for a specific type. For example, only hard drive defined as the

first priority on the

Hard Drive BBS Priorities

submenu will be presented here.

Removable storage devices that support GPT format will be prefixed with "UEFI:" string on the boot device

list. To boot from an operating system that supports GPT partitioning, select the device prefixed with "UEFI:"

string.

Or if you want to install an operating system that supports GPT partitioning such as Windows 7 64-bit, select

the optical drive that contains the Windows 7 64-bit installation disk and is prefixed with "UEFI:" string.

Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities

Specifies the boot order for a specific device type, such as hard drives, optical drives, floppy disk drives,

and devices that support Boot from LAN function, etc. Press <Enter> on this item to enter the submenu that

presents the devices of the same type that are connected. This item is present only if at least one device

for this type is installed.

Bootup NumLock State

Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default:

Enabled)

Security Option

Specifies whether a password is required every time the system boots, or only when you enter BIOS Setup.

After configuring this item, set the password(s) under the

Administrator Password/User Password

item.

Setup

A password is only required for entering the BIOS Setup program.

System

A password is required for booting the system and for entering the BIOS Setup

program. (Default)

Full Screen LOGO Show

Allows you to determine whether to display the GIGABYTE Logo at system startup.

Disabled

skips the

GIGABYTE Logo when the system starts up. (Default: Enabled)

Содержание GA-990FXA-UD7

















































































































Результаты поиска

Содержание GA-990FXA-UD7

Отзывы:

Похожие инструкции для GA-990FXA-UD7

Бренды по названию

Популярные бренды

Gigabyte GA-990FXA-UD7, Руководство пользователя

Результаты поиска

Содержание GA-990FXA-UD7

Отзывы:

Похожие инструкции для GA-990FXA-UD7

Бренды по названию

Популярные бренды