background image

- 45 -

BIOS Setup

2-4 System

This section provides information on your motherboard model and BIOS version. You can also select the default 

language used by the BIOS and manually set the system time.

 

&

System Language

 

Selects the default language used by the BIOS.

 

&

System Date

 

Sets the system date. The date format is week (read-only), month, date, and year. Use <Enter> to 

switch between the Month, Date, and Year fields and use the <Page Up> or <Page Down> key to set the 

desired value.

 

&

System Time

 

Sets the system time. The time format is hour, minute, and second. For example, 1 p.m. is 13:0:0. 

Use <Enter> to switch between the Hour, Minute, and Second fields and use the <Page Up> or <Page 

Down> key to set the desired value.

 

&

Access Level

 

Displays the current access level depending on the type of password protection used. (If no password is 

set, the default will display as Administrator.) The Administrator level allows you to make changes to all 

BIOS settings; the User level only allows you to make changes to certain BIOS settings but not all.

 

`

ATA Port Information

 

This section provides information on the device connected to each SATA port controlled by AMD Chipset.

Содержание GA-990FXA-UD7

















































































































Отзывы: