Gigabyte GA-7DX+, Руководство пользователя

Страница: 111 / 143

7DX(R)+/7DXE Motherboard
101
Set Supervisor / User Password
When you select this function, the following message will appear at the center of the screen to
assist you in creating a password.
Figure 12: Password Setting
Type the password, up to eight characters, and press <Enter>. You will be asked to confirm the
password. Type the password again and press <Enter>. You may also press <Esc> to abort the
selection and not enter a password.
To disable password, just press <Enter> when you are prompted to enter password. A message
“PASSWORD DISABLED” will appear to confirm the password being disabled. Once the
password is disabled, the system will boot and you can enter Setup freely.
The BIOS Setup program allows you to specify two separate passwords: a SUPERVISOR
PASSWORD and a USER PASSWORD. When disabled, anyone may access all BIOS Setup
program function. When enabled, the Supervisor password is required for entering the BIOS
Setup program and having full configuration fields, the User password is required to access only
basic items.
If you select “System” at “Password Check” in Advanced BIOS Feature Menu, you will be
prompted for the password every time the system is rebooted or any time you try to enter Setup
Menu.
If you select “Setup” at “Password Check” in Advanced BIOS Feature Menu, you will be
prompted only when you try to enter Setup.
“*” For GA-7DXR+ only. “**” For GA-7DX+ only.
CMOS Setup Utility-Copyright( C ) 1984-2002 Award Software
4
Standard CMOS Features
4
Frequency/Voltage Control
4
Advanced BIOS Features Load Fail-Safe Defaults
4
Advanced Chipset Features Load Optimized Defaults
4
Integrated Peripherals Set Supervisor Password
4
Power Management Setup Set User Password
4
PnP/PCI Configurations Save & Exit Setup
4
PC Health Status Exit Without Saving
ESC:Quit
↑↓→ ←
: Select Item
F8: Dual BIOS*/**/Q-Flash F10:Save & Exit Setup
Change / Set / Disable Password
Enter Password: