GIGA-BYTE TECHNOLOGY X570S AORUS MASTER, Руководство пользователя

Страница: 49 / 108

BIOS Setup - 49 -
ƒ
Advanced Memory Settings
ƒ
Memory Subtimings
d
Standard Timing Control/Advanced Timing Control/CAD Bus Setup Timing/
CAD Bus Drive Strength/Data Bus Configuration
These sections provide memory timing settings. The respective timing setting screens are configurable
only when Memory Timing Mode is set to Manual . Note: Your system may become unstable or fail to
boot after you make changes on the memory timings. If this occurs, please reset the board to default
values by loading optimized defaults or clearing the CMOS values.
ƒ
SPD Info
Displays information on the installed memory.
&
Power Down Enable
Enables or disables Power Down support. (Default: Auto)
&
CPU Vcore/Dynamic Vcore(DVID)/VCORE SOC/Dynamic VCORE SOC(DVID)/
CPU VDD18/CPU VDDP/DRAM Voltage (CH A/B)/DDRVPP Voltage (CH A/B)/DRAM
Termination (CH A/B)/VDDP Voltage Conrol
(Note)
/VDDG Voltage Control
(Note)
These items allow you to adjust the CPU Vcore and memory voltages.
ƒ
CPU/VRM Settings
This submenu allows you to configure Load-Line Calibration level, over-voltage protection level, over-
current protection level, and PWM phases.
(Note) This item is present only when you install a CPU that supports this feature.