GIGA-BYTE TECHNOLOGY X570S AORUS MASTER, Руководство пользователя

Страница: 20 / 108

- 20 - Hardware Installation
1-6 Setting up AMD CrossFire ™ Configuration (Note 1)
Procedure and driver screen for enabling CrossFire technology may differ by graphics cards and
driver version. Refer to the manual that came with your graphics cards for more information about
enabling CrossFire technology.
(Note 1) For AMD Ryzen
™
5000 Series Processors/AMD Ryzen
™
4000 G-Series Processors/AMD Ryzen
™
3000 Series Processors/AMD Ryzen
™
2000 Series Processors only.
(Note 2) The bridge connector(s) may be needed or not depending on your graphics cards.
A. System Requirements
-
Windows 10 64-bit operating system
- A CrossFire-supported motherboard with two or more PCI Express x16 slots and correct driver
-
CrossFire-ready graphics cards of identical brand and chip and correct driver
- CrossFire
(Note 2)
bridge connectors
-
A power supply with sufficient power is recommended (Refer to the manual of your graphics cards for
the power requirement)
B. Connecting the Graphics Cards
Step 1:
Observe the steps in "1-5 Installing an Expansion Card" and install the graphics cards on the PCIEX16 and
PCIEX8 slots.
Step 2:
Insert the CrossFire
(Note 2)
bridge connectors in the CrossFire gold edge connectors on top of the cards.
Step 3:
Plug the display cable into the graphics card on the PCIEX16 slot.
C. Configuring the Graphics Card Driver
After installing the graphics card driver in the operating
system, go to the
AMD RADEON SETTINGS screen.
Browse to Gaming\Global Settings and ensure AMD
CrossFire is set to
On .