GIGA-BYTE TECHNOLOGY X570S AORUS MASTER, Руководство пользователя

Страница: 37 / 108

- 37 - Hardware Installation
20) THB_C (Thunderbolt
™
Add-in Card Connector)
This connector is for a GIGABYTE Thunderbolt
™
add-in card.
Supports a Thunderbolt
™
add-in card.
F_USB30
F_U
B_
F_ F_
_
B
BS_
B
SB_
B
_ S
S_
_
B
_U
_
B
S
12
3
1 2 3
12
3
12 3
1
1
1
1
BS S
S
_S
S S U
1 2 3 4 5
S 3
BS S S
U
_ _ 3
F_USB3F
S _
S _
S _
S F
B_
B_
F
_0
S
S
_0 F
_F
_
_
_ _B
U
S _S
_
S F_
B
USB0_ B
B_
B_
F_USB3 F_USB303
_
_3 U
S_
1
21) BAT (Battery)
The battery provides power to keep the values (such as BIOS configurations, date, and time information)
in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a
low level, or the CMOS values may not be accurate or may be lost.
You may clear the CMOS values by removing the battery:
1. Turn off your computer and unplug the power cord.
2. Gently remove the battery from the battery holder and wait for one
minute. (Or use a metal object like a screwdriver to touch the positive
and negative terminals of the battery holder, making them short for
5 seconds.)
3. Replace the battery.
4. Plug in the power cord and restart your computer.
•
Always turn off your computer and unplug the power cord before replacing the battery.
• Replace the battery with an equivalent one. Damage to your devices may occur if the battery
is replaced with an incorrect model.
• Contact the place of purchase or local dealer if you are not able to replace the battery by
yourself or uncertain about the battery model.
• When installing the battery, note the orientation of the positive side (+) and the negative side (-)
of the battery (the positive side should face up).
• Used batteries must be handled in accordance with local environmental regulations.