GIGA-BYTE TECHNOLOGY X570S AORUS MASTER Скачать руководство пользователя страница 11

Страница: 11 / 108

- 11 -

Hardware Installation

(Note 1) For AMD Ryzen

™

5000 Series Processors/AMD Ryzen

™

3000 Series Processors only.

(Note 2) For AMD Ryzen

™

5000 Series Processors/AMD Ryzen

™

4000 G-Series Processors/AMD Ryzen

™

3000 Series Processors/AMD Ryzen

™

2000 Series Processors only.

Expansion Slots

1 x PCI Express x16 slot (PCIEX8), integrated in the CPU:

- AMD Ryzen

™

5000 Series Processors/AMD Ryzen

™

3000 Series Processors

support PCIe 4.0 x8 mode

AMD Ryzen

™

4000 G-Series Processors/AMD Ryzen

™

2000 Series Processors

support PCIe 3.0 x8 mode

AMD Ryzen

™

3000 G-Series Processors/AMD Ryzen

™

2000 G-Series Processors

do not support this slot

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is

populated, the PCIEX16 slot operates at up to x8 mode.

1 x PCI Express x16 slot (PCIEX4), integrated in the Chipset:

- Supporting PCIe 4.0

(Note 1)

/3.0 x4 mode

* The PCIEX4 slot shares bandwidth with the M2C_SB connector. The PCIEX4 slot

becomes unavailable when a device is installed in the M2C_SB connector.

Multi-Graphics

Technology

(Note 2)

Support for AMD Quad-GPU CrossFire

™

and 2-Way AMD CrossFire

™

technologies

Storage Interface

1 x M.2 connector (M2A_CPU), integrated in the CPU, supporting Socket 3,

M key, type 2242/2280/22110 SSDs:

- AMD Ryzen

™

5000 Series Processors/AMD Ryzen

™

3000 Series

Processors support SATA and PCIe 4.0 x4/x2 SSDs

AMD Ryzen

™

4000 G-Series Processors/AMD Ryzen

™

3000 G-Series

Processors/AMD Ryzen

™

2000 Series Processors/AMD Ryzen

™

2000 G-Series

Processors support SATA and PCIe 3.0 x4/x2 SSDs

1 x M.2 connector (M2B_SB), integrated in the Chipset, supporting Socket 3,

M key, type 2242/2280/22110 SSDs:

- Supporting PCIe 4.0

(Note 1)

/3.0 x4/x2 SSDs

2 x M.2 connectors (M2C_SB/M2D_SB), integrated in the Chipset, supporting

Socket 3, M key, type 2242/2280/22110 SSDs:

- Supporting SATA and PCIe 4.0

(Note 1)

/3.0 x4/x2 SSDs

6 x SATA 6Gb/s connectors, integrated in the Chipset:

- Support for RAID 0, RAID 1, and RAID 10

* Refer to "1-9 Internal Connectors," for the installation notices for the M.2 and SATA

connectors.

USB

CPU:

- 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel

- 2 x USB 3.2 Gen 1 ports on the back panel

ASMedia

USB 3.2 Gen 2x2 Controller:

- 1 x USB Type-C

port on the back panel, with USB 3.2 Gen 2x2 support

Chipset:

- 1 x USB Type-C

port with USB 3.2 Gen 2 support, available through the

internal USB header

- 3 x USB 3.2 Gen 2 Type-A ports (red) on the back panel

- 4 x USB 3.2 Gen 1 ports, available through the internal USB headers

Содержание X570S AORUS MASTER













































































































Результаты поиска

Содержание X570S AORUS MASTER

Отзывы:

Бренды по названию

Популярные бренды

GIGA-BYTE TECHNOLOGY X570S AORUS MASTER, Руководство пользователя

Результаты поиска

Содержание X570S AORUS MASTER

Отзывы:

Бренды по названию

Популярные бренды