RoadLED 50m
Page 11 / 20
Created
23.04.2021
rasa
Modified
06.10.2021
rasa
Object-ID
2214657
5 Reparation / replacing light module
In principle, the following components can be exchanged upon request with consideration given to the ESD
protection measures:
•
Upper housing part with sealing
•
Lower housing part with sealing
•
Light modules
However, it is advisable to replace the entire light module (item no. 860837).
ESD protection measures
Sensitive electrical or electronic parts, components and devices can be damaged or even destroyed by an
electrostatic discharge in the immediate vicinity. An electrostatic discharge can come from people or be
caused through handling ESD-sensitive components. Electrically conductive products which conform to
DIN EN 61340-5-1: Protection of electronic devices from electrostatic phenomena are essential in electro-
nic environments to prevent an electrostatic discharge.
5.1 Reparation light module 1-15
1. Open the housing of the defective
module
Loosen the 4 housing screws with a Torx T6
screwdriver and remove the upper housing
part.
2. Remove the strands from the
electronics
Remove the strands from the self cutting
terminals. Use a tool to pull the strands
upwards.
Remove the old light module.
